E-911

    Configure Notifications for E911 Calling

    The VoIP Help Page Team·2 min read·Last updated: March 14, 2026

    This article provides instructions for configuring notifications within the Manager Portal when a user dials 911 or 933, covering both domain-wide and site-specific settings.

    Scope

    This article outlines how to configure notifications when a user dials 911 or 933 in the Manager Portal. The message will be played/shown as follows: There is an emergency call from <User's Name> at <User's Extension>.

    Requirements

    • White Label Access to Manager Portal
    • Poly UC device (firmware 5.7 or higher) or Yealink device (firmware 86.0.21 or higher)

    NOTE: This is only needed to receive notifications directly to the phone screen.

    Configure Notifications for a Domain

    1. 1

      Log in to the Manager Portal

    2. 2

      Navigate to Domains

    3. 3

      Click Edit for the domain you wish modify

    4. 4

      Navigate to the Emergency tab

    5. 5

      Scroll down to Emergency Notifications and complete each field as desired

      • Notify Via Phone Call: These users will receive a phone notifying them that an emergency call has been made. Only extensions may be selected for this feature, not remote DIDs
      • Notify Via Phone Message: These users will receive a pop-up on their phone screen notifying them that an emergency call has been made (Poly UC and Yealink devices only)
      • Notify Via Email: These email addresses will receive an email notification with the user's name and extension that dialed 911 or 933.
    6. 6

      Click Save

    Configure Notifications for a Site

    To add notifications to a site, the site must already have been created.

    1. 1

      Log in to the Manager Portal

    2. 2

      Select the domain you wish to use

    3. 3

      Navigate to Users

    4. 4

      Go to the Sites tab

    5. 5

      Select the site to add notifications for

    6. 6

      Scroll down to Emergency Notifications and complete each field as desired

      • Notify Via Phone Call: These users will receive a phone notifying them that an emergency call has been made. Only extensions may be selected for this feature, not remote DIDs
      • Notify Via Phone Message: These users will receive a pop-up on their phone screen notifying them that an emergency call has been made (Poly UC and Yealink devices only)
      • Notify Via Email: These email addresses will receive an email notification with the user's name and extension that dialed 911 or 933.
    7. 7

      Click Save

    Was this article helpful?