Mobile Applications

Android Native Phone App

The VoIP Help Page Team·2 min read·Last updated: March 14, 2026

This article provides a step-by-step guide to configure the native phone application on Android devices for use with your Hosted PBX service.

Scope:

The following steps will allow you to configure the Android phone application for use with your Hosted PBX service.

Requirements:

Android OS 4.1.1 or higher
SIP Credentials - Find how to get them here

Account Setup

1

Open the Phone application
2

Select the ellipses menu at the top right
3

Select Settings
4

Select Calls
5

Select Calling accounts
6

Select SIP accounts
7

At the top right select the + icon
8
Select each field and use your SIP credentials to fill them out
1. 1
  Username: Enter the Username
2. 2
  Password: Enter the Password
3. 3
  Server: Enter the Domain/Proxy
4. 4
  Select Optional Settings to show all
5. 5
  Authentication username: Enter the Username
6. 6
  Outbound proxy address: sbc.ucaasnetwork.com
9

At the top right select SAVE
10

You should now see your account listed. Press the back arrow
11

Select Make calls with
12

Select Ask first
13

Select Use SIP calling
14

Select For all calls
15

Enable Receive incoming calls
16

Select the back arrow until you get to the home screen
17

From the dialer enter a number you wish to call
18

Press the green dial key
19

You will be prompted with a screen asking which account to use
20

Select the SIP account you set up above

Related Articles

Build the TeamMate Connector Application

Apps & Integrations

Install Progressive Web App for SNAPmobile Web

Apps & Integrations

Create and Apply a Template on SNAPbuilder

Apps & Integrations

Was this article helpful?