V
    VoIP Help Page
    Axis

    Axis A8105-E Manual Configuration

    The VoIP Help Page Team·2 min read·Last updated: March 14, 2026

    This article provides a step-by-step guide to manually configure an Axis A8105-E device to register with a VoIP platform, covering how to obtain SIP credentials, enable SIP settings, and register the account.

    Scope:

    The following steps will allow you to register an Axis A8105-E onto our VOIP platform.

    Items Needed

    • Access to Axis A8105-E Web GUI
    • Access to the Manager Portal (Office Manager or Above)

    Obtain SIP Credentials

    1. 1
      Using any web browser log in to the Manager Portal.
    2. 2
      Click on Users at the top.
    3. 3
      Find your extension number. At the far right click on the pencil, and then Phones.
    4. 4
      Click on Add Phone.
    5. 5
      Leave as default and then click Add.
    6. 6
      The page will refresh and you will now see your extension in the list. Click on the pencil again.
    7. 7
      Note the information in the popup. You will need it for the next step.

    Enable SIP

    1. 1
      Click VoIP.
    2. 2
      Click SIP Settings.
    3. 3
      Under SIP Settings, Checkmark Enable SIP.
    4. 4
      Under Port Settings:
      • RTP Start Port: 29000
    5. 5
      Under Audio Codec Settings:
      • Selected Codecs: PCMU and PCMA
    6. 6
      Video Direction: Send and Receive.

    Registering Account

    1. 1

      Click VoIP.

    2. 2

      Click Account Settings.

    3. 3

      Click Add.

    4. 4

      Fill out the following:

      • Check Mark Account Enabled
      • User ID: From the first section
      • Check Mark Use User ID as Authentication ID
      • Authentication ID: Same as User ID
      • Password: From the first section
      • Domain Name: From the first section
      • Registrar Address: sbc.ucaasnetwork.com

    5. 5

      Click Save.

    Related Articles

    Grandstream Call Park Manual Configuration

    Phones & Devices

    Algo Manual Configuration

    Phones & Devices

    Snom M300 Manual Configuration

    Phones & Devices

    Was this article helpful?