V
    VoIP Help Page
    Phones & Devices

    Grandstream GDS3710 to Yealink T58 Video Call Setup

    The VoIP Help Page Team·1 min read·Last updated: March 14, 2026

    **Scope**:

    This document will help you adjust the settings on the GDS3710 with firmware XXXX to allow audio and video during a call on your hosted PBX service.

    Requirements:

    Configure GDS3710 via Web GUI

    1. 1
      Log in to GDS3710 Web GUI

    NOTE: Username is admin, default password is printed on the back panel of the device 2. Complete the following fields using the SIP credentials from the Manager Portal

    • Account Name: Name of the device

    • SIP Server: Enter the Domain/Proxy

    • Outbound Proxy: sbc.ucaasnetwork.com

    • SIP User ID: Enter the Username

    • Authentication ID: Enter the Username

    • Password: Enter the Password

    1. 1

      Go to Door System Settings

    2. 2

      Call Mode: SIP Number

    3. 3

      Doorbell Mode: Call Doorbell Number

    4. 4

      Door Bell Call Mode: Serial Hunting

    5. 5

      Number Called When Door Bell Pressed: Extension of the Yealink phone

    6. 6

      Go to SIP Setting > SIP Advanced Settings > Enable SIP Proxy Compatibility Mode

    Related Articles

    Grandstream Call Park Manual Configuration

    Phones & Devices

    Yealink Perform a Firmware Update

    Phones & Devices

    Yealink Manual Provisioning

    Phones & Devices

    Was this article helpful?