Avaya Manual Configuration

1. 1
   Log into Manager Portal
2. 2
   Navigate to Phones

NOTE: Office Managers can navigate to Users > select the user > Phones

3. Select Phone Info for the phone you wish to register.

NOTE: You will only see the information if the phone model is set to Manual or Softphone

4. Take note of the listed information.

5. Click Cancel when you are finished

1. 1
   From the Avaya phone, press Main Menu (hamburger menu icon)

2. Select Network Information > IP Parameters 3. Take note of the IP address for the next steps

1. 1
   Using any web browser navigate to the IP address of the phone.

NOTE: This should be prefixed with https://. For example, https://8.8.8.8 2. Log in. The default credentials are admin / 27238. If these are incorrect, contact your current service provider or the vendor the phones were purchased from to obtain the login. 3. Select SIP at the top

4. Complete the below fields, leaving all others as default

• SIP Domain: Enter the Domain/Proxy

• Proxy Policy: Manual

• SIP Proxy Server: sbc.ucaasnetwork.com:5060;transport=tcp

• Voice Mail Access Code: 9901

  NOTE: This field should be at the bottom of the page

5. 1
   Click Save

6. Edit the SIP Account at the top

• SIP User ID: Username from Manager Portal
• Authentication Password: Password from Manager Portal

7. 1
   Click Login

8. The page will refresh. The Register Status at the top should now say Registered