Snom PA1 Manual Configuration

The following document will show you how to manually provision a Snom PA1 system

Requirements

• Access to Snom web GUI
• Access to Manager Portal
• An unassigned SIP phone must be available on the user

1. 1
   Using any web browser navigate to the IP address of the phone.
2. 2
   Under the Setup tab on the left, click Identity 1.

3. In the Login section, fill in SIP Credentials:

1. 1
   Identity Active: ON
2. 2
   Display Name: Username from the phone settings
3. 3
   Account: Username from the phone settings.
4. 4
   Password: Password from the phone settings.
5. 5
   Registrar: Domain/Proxy from the phone settings
6. 6
   Outbound Proxy: Outbound Proxy from the phone settings
7. 7
   Authentication Username: Username from the phone settings
8. 8
   Press Apply

5. A notification will appear indicating that there are unsaved changes. Click Save. 6. Go to the SIP section on the top row. 7. Fill in settings to match below information.

1. 1
   Proxy Require: Outbound Proxy from the phone settings
2. 2
   Auto Answer: on
3. 3
   Click Apply, then Save.