Provisioning

    Snom C-Series Manual Provisioning

    The VoIP Help Page Team·1 min read·Last updated: March 14, 2026

    **Scope:**

    The following document will show you how to remote provision a Snom C series phone. For TLS Provisioning check HTTP Provisioning over TLS

    Requirements:

    • Access to Snom web GUI
    • Access to Manager Portal
    • Phone's MAC address must already have been added to a user in the Manager Portal
    • Global Username and Password provided by support.

    Configure Snom Phone

    1. 1
      Using any web browser navigate to the IP address of the phone.
    2. 2
      Click on the Servicing tab.

    3. Click on the Provisioning tab.

    4. In the Setting URL enter the provisioning URL for your domain along with the Global Username and Password provided by support and click on Save at the bottom of the page.

    http://ndp.ucaasnetwork.com/cfg/{mac}
    
    1. 1
    2. 2
       Click on the Reboot tab and click on Reboot.

    3. Your phone will download the config and reboot at least once.

    Was this article helpful?