Yealink Screen Capture and Access

The following steps will allow you to view the screen remotely for any Yealink phone

Requirements:

• This requires firmware v73 or higher
• Original instructions can be found here

1. 1
   Enter your credentials. Default is admin/admin. After provisioning these will be changed. Contact your service provider for credentials if needed
2. 2
   Click on Features
3. 3
   Click on Remote Control

4. In the field Action URI Allow IP List enter any

5. Click Confirm

1. 1
   Add the following override to your Advanced page in the Manager Portal or NDP

   • features.action_uri_limit_ip="any"

1. 1
   From any web browser navigate to https://<ipofphone>/screencapture
2. 2
   You will be prompted for a user name and password. These are the same as the web GUI credentials. Contact your service provider if you do have them

3. The screen will refresh with the same image that is present on the phone's screen

1. 1

   From any web browser navigate to https://dm.yealink.com

2. 2

   You will be prompted for a Username and Password. enter your credentials and login.

3. 3

   After logging in, click Phone Device, then Device List

4. 4

   Search for your device using the MAC Address, then on to the right of the device, click

Diagnosis 5. Click on Screen Capture

6. 1
   An image of the device's screen will be displayed. You can click Screen Capture again to

refresh, or click Download to download an image of the screen