Axis I8016-LVE Intercom Manual Registration

This article explains how to manually register the AXIS I8016-LVE Network Video Intercom, perform a test call, and add a contact to the call button.

• Office Manager access
• AXIS WebUI Access

1. 1

   Log into Manager Portal

2. 2

   Navigate to Phones

   • Note: Office Managers can navigate to Users > select the user > Phones
3. 3

   Select Phone Info for the phone you wish to register.

   • Note: You will only see the information if the phone model is set to Manual or Softphone.

1. 1

   Go to Communications > SIP > Accounts > Click Add account

2. 2

   Add the following:

   1. 1
      Name: Input a Name
   2. 2
      User ID: Input the Device Extension (include suffix if there's any)
   3. 3
      Domain: Input the Domain
   4. 4
      Password: Input the Device's Password
   5. 5
      Authentication ID: Input the Username
   6. 6
      Caller ID: Input the Caller ID
   7. 7
      Registrar: Input the Outbound Proxy Address

      1. 1
         sbc.ucaasnetwork.com - ATL
      2. 2
         sbc-iad.ucaasnetwork.com - IAD
      3. 3
         sbc-phx.ucaasnetwork.com - PHX
3. 3

   Save these settings to the device and it will register.

1. 1
   Go to Communications > SIP > Test Call
2. 2
   Choose the Account you have registered.
3. 3
   Input the ring group/call queue extension to the SIP address field in this format: "sip:ext@registrar"

   • Example: sip:511@sbc-iad.ucaasnetwork.com
4. 4
   Click the Call Icon to test.

1. 1
   Go to Communications > Contact List
2. 2
   Add the new Contact to the SIP address in this format: "sip:ext@registrar"

   • Example: sip:511@sbc-iad.ucaasnetwork.com
3. 3
   Go to Communications > Calls
4. 4
   Enable the Call Button
5. 5
   Add your new Contact to the Recipients