Skip to main content

Polycom Zero Touch Provision (ZTP) and PDMS-SP

Scope​

Intended Audience: All Users

This article goes over the steps of how to add a device via Polycom's ZPT as well as PDMS-SP

Requirements​

ZTP​

  • Access to Polycom ZTP site
  • A list of all MAC Addresses needed to be added to ZTP
  • MAC addresses must already have been entered in the Manager Portal

PDMS-SP​

  • An Obitalk.com Account
  • Lineman's butt set, or an analog phone
  • All entries are case-sensitive unless otherwise noted
  • Firmware Version Required: 3.1.0 (build 5110)+

Polycom Zero Touch Provision (ZTP)

Note: All Polycom Devices are compatible with Polycom Zero Touch Provision (ZTP)

Provisioning: Add Global Username and Password to Polycom ZTP Profile​

  1. Log into your Poly ZTP console
  2. Select the Profile option from the top menu
  3. Select the profile you wish to add the Global username and password to
  4. Under Provisioning, enter the provisioning URL http://ndp.ucaasnetwork.com/cfg and the Global Username and Password, then click Save
  5. All future devices using the selected profile will now use the Global One Time Username and Password to authenticate with the configuration server.

Adding Devices to ZTP​

  1. Log into your Poly ZTP console
  2. Select the Device option from the top menu
  3. Select Register Devices
  4. Fill out the following information
    1. MAC Address: MAC Address of Phone
    2. Profile: Select the profile name of the provisioning server
    3. Tag: <domain name> optional Note: Alternatively, you can also download the template, fill out the fields, and upload the devices via .csv
  5. Click Register Devices
  6. The status of the registration will be confirmed once it is completed